The Caveman family of Semi-automatic Wire cutters are designed specifically for Wire Harness Fabrication Operations that deal with components with cords (or cables) already attached. Examples of these devices include:

  • Computer fans
  • Solenoids
  • Air bag inflators
  • LED's
  • Proximity sensors
  • Transformers
  • Stepper motors
  • Magnet coils
  • short run protoypes
Contact Info:
888-876-2283 Voice
302-234-9969 Voice
302-235-0523 Fax
 
 
Pricing Information

 

The LT300 cutter provides a portable workstation with adjustable length stop and a pneumatic powered shear for cutting wire leads to a pre-determined length. Setup is as simple as moving the slide assembly to the desired length (as shown on the integrated scale) and tightening the thumbscrew.

The cutter is actuated by depressing a footswitch (LT300F), or by passing wire(s) through the slot which hits a trigger switch (LT300A). Once a check cut has been verified for proper adjustment, you are ready to cut 10, 100, 1,000 or more pieces with extremely good accuracy.

 

Features

5/16 inch wide cut slot will accept multiple wires Vertical mounting bracket (Optional)
Compressed air driven cutting action Footswitch and Internal Trigger Models

Conform to UL and OSHA safety standards

Scales labeled in both inches and centimeters
Inexpensive, readily available commercial cutter blades Tape Measure hook slot for longer cut setups
Powerful cutting action cuts multiple wires up to 10 AWG copper Modular Rail System up to 72 inches long